Professional angle polisher with high power reserves even at low speeds.

• Variable speed with setting wheel
• Long-life silicone connecting cable
• Temperature-dependent overload protection
• Spindle lock for easy tool change
• Self-shutting carbon brushes and easy brush exchange
• Control valve with a hose
• A splash guard reduces the amount of moisture and dust that enters the motor
  Spindle with double-row ball bearing

GALESKI quality for highest loads: Double ball bearing of the spindle in the rinsing head.

◆ Proven, flexible and transparent splash guard. This means that less moisture and dirt is
sucked into the engine compartment. This significantly increases the service life of the
machine.
◆ Water-cooled Aluminium end shield.
◆ Wear-resistant and unbreakable silicone power cable in signal colour (clearly visible).
◆ Soft start and electronics for constant speed even under load.
◆ Temperature-dependent overload protection.
◆ Spindle lock for easy tool changes.
◆ Speed range designed for stone polishing with infinitely variable speed regulation.
◆ 2 service ports for easy replacements of the carbon brushes.
◆ Bail handle and ergonomic rear handle for safe and comfortable work.
◆ Special requests (e.g. for longer connecting cables or hoses) can be considered.

Application:
Wet polisher for natural or artificial stone processing. Especially suitable for stonemasons,
sculptors, restorers, tilers, renovators, floor renovators, etc.

Technical Data:
Voltage: 110 Volt Spindle thread: M 14
Power: 1,750 Watt Weight: 3.5 kg
Speed: 800 – 3,600 rpm Soft start
Tool Ø max.: 125 mm Overload protection

Included:
Silicone connecting cable 4 m, hose 2.5 m with brass quick coupling, bail handle, CEE-plug, splash guard, carton.